The motor stator disassembly machine mainly consists of a hydraulic pump, hydraulic control system, thread cutting cylinder component, wire drawing cylinder component, and electric control system. It can be disassembled for 8-slot stator and 12 slot stator. The hydraulic copper cutting machine in the dismantling equipment of waste motors is an environmentally friendly equipment that cuts the copper wires in the motor stator. The entire equipment is driven by hydraulic pressure. When cutting, the waste motor stator is first supported on the support column (drum structure), and the copper cutting positioning plate is used to position the motor stator, The working ability of this equipment is equivalent to manual disassembly by ten workers, which controls the up and down movement of the cutting blade through one foot switch and the up and down limit position of the induction switch to cut the copper wire coil of the motor stator.
Dear Karachi [Motor stator dismantling machine] customer, it is very lucky that you can find us in the vast information! Pollution reduction and carbon reduction, synergy and efficiency, innovation and development, green transformation Maoxin Machinery is a Chinese Motor stator dismantling machine product supplier. Since its establishment, A new city that is livable and industry-friendly, energy-saving and emission-reducing, civilized style has been deeply involved in the Lithium battery and circuit board recycling field and has provide China best-selling Motor stator dismantling machine products for Lithium battery and circuit board recycling customers! The following is the relevant information of Motor stator dismantling machine product organized by Maoxin Machinery for you. Maoxin are willing to provide you with new Motor stator dismantling machine information to help you make a correct choice!
The motor stator disassembly machine mainly consists of a hydraulic pump, hydraulic control system, thread cutting cylinder component, wire drawing cylinder component, and electric control system. It can be disassembled for 8-slot stator and 12 slot stator. The hydraulic copper cutting machine in the dismantling equipment of waste motors is an environmentally friendly equipment that cuts the copper wires in the motor stator. The entire equipment is driven by hydraulic pressure. When cutting, the waste motor stator is first supported on the support column (drum structure), and the copper cutting positioning plate is used to position the motor stator, The working ability of this equipment is equivalent to manual disassembly by ten workers, which controls the up and down movement of the cutting blade through one foot switch and the up and down limit position of the induction switch to cut the copper wire coil of the motor stator.
First, support the waste motor stator on the support column, and use a copper cutting positioning plate to position the motor stator. Use one of the foot switches to control the cutting blade to cut off the copper wire coils of the motor stator; Then place the cut motor stator on the lifting table of the copper pulling machine, and control the motor stator to rise to the copper pulling positioning plate through a manual switch. The copper pulling positioning plate limits the motor stator, and then use another foot switch to control the pliers to bite the copper coil, pull the copper wire coil out of the stator, and complete the disassembly of the stator. Users can recover the copper wire coil and stator core according to the actual situation.
The copper dismantling machine for the motor uses a foot switch, and the motor stator with copper wire coils after cutting is placed on the lifting table to rotate the screw of the puller. Mark the gap between the end cover and the base for easy resetting during assembly. The company has a copper production line for dismantling and recycling of waste rotors. We have stock available and welcome you to come and inspect and negotiate machine testing. You can ship the goods by paying the deposit, and the remaining payment will be collected and paid in full. And extend to the periphery of the connecting bolt hole, with a thickened section equipped with a crescent groove for the hammer head to rotate. Supply scrap motor dismantling and copper pulling equipment, air conditioning dismantling copper machines, company direct sales, quality assurance.
|
Model |
Power（kw） |
Size（mm） |
Weight（kg） |
Pressure（Map） |
|
RSE-15 |
4kw |
1400*1100*1200(mm) |
580kg |
0~15Map |
|
RSE-45 |
4kw |
2600*1010*1200(mm) |
800kg |
0~15Map |
Craftsmanship, concentration and concentration！Maoxin can listen to calls from Karachi friends at any time. You can choose the following contact methods!
Science has proved that interactive communication is an effective way to obtain information! Do you have any questions about Motor stator dismantling machine? Don't hesitate to act now!
Select immediate telephone contact: fixed telephone: +86 18539447368
Technical consultation telephone: +86 18539447368
Choose online convenient contact: computer website: http://www.cnchangtong.com
Whatsapp: {whatsapp}
Maoxin Email: Maoxin
WeChat: the same phone number +86 18539447368
Maoxin wish customers Every communication is a collision of hearts, let us work more closely together to create a win-win situation. Henan Maoxin Machinery Equipment Co., Ltd is looking forward to cooperating with you. It is a great honor for Maoxin to provide you with Motor stator dismantling machine series products of good quality and cheap price! Continuous innovation is the constant pursuit of Motor stator dismantling machine quality by Maoxin. Maoxin are willing to work with you to open a better future.
Gongyi City West Industrial Zone, Henan Province, China
Phone (WeChat): +86 18539447368
Email: 18539447368@163.com
