Motor stator dismantling machine

Brief introduction

The motor stator disassembly machine mainly consists of a hydraulic pump, hydraulic control system, thread cutting cylinder component, wire drawing cylinder component, and electric control system. It can be disassembled for 8-slot stator and 12 slot stator. The hydraulic copper cutting machine in the dismantling equipment of waste motors is an environmentally friendly equipment that cuts the copper wires in the motor stator. The entire equipment is driven by hydraulic pressure. When cutting, the waste motor stator is first supported on the support column (drum structure), and the copper cutting positioning plate is used to position the motor stator, The working ability of this equipment is equivalent to manual disassembly by ten workers, which controls the up and down movement of the cutting blade through one foot switch and the up and down limit position of the induction switch to cut the copper wire coil of the motor stator.

Process flow

First, support the waste motor stator on the support column, and use a copper cutting positioning plate to position the motor stator. Use one of the foot switches to control the cutting blade to cut off the copper wire coils of the motor stator; Then place the cut motor stator on the lifting table of the copper pulling machine, and control the motor stator to rise to the copper pulling positioning plate through a manual switch. The copper pulling positioning plate limits the motor stator, and then use another foot switch to control the pliers to bite the copper coil, pull the copper wire coil out of the stator, and complete the disassembly of the stator. Users can recover the copper wire coil and stator core according to the actual situation.

The copper dismantling machine for the motor uses a foot switch, and the motor stator with copper wire coils after cutting is placed on the lifting table to rotate the screw of the puller. Mark the gap between the end cover and the base for easy resetting during assembly. The company has a copper production line for dismantling and recycling of waste rotors. We have stock available and welcome you to come and inspect and negotiate machine testing. You can ship the goods by paying the deposit, and the remaining payment will be collected and paid in full. And extend to the periphery of the connecting bolt hole, with a thickened section equipped with a crescent groove for the hammer head to rotate. Supply scrap motor dismantling and copper pulling equipment, air conditioning dismantling copper machines, company direct sales, quality assurance.

Technical parameter

Work together to build a dream for the future and aim for a sea of stars In today's intelligent manufacturing industry, the craftsman spirit is not outdated, and its essence is to do things wholeheartedly. Henan Maoxin Machinery Equipment Co., Ltd ,For many years, Maoxin Machinery has been dedicated to the field of Lithium battery and circuit board recycling and polished "craftsman" level talents on Motor stator dismantling machine !  Congratulations to Biombo friends "May your team continue to thrive and achieve great things in the coming year!"

---

Maoxin takes Biombo friends to see China! What supports a populous country to become a manufacturing powerhouse? Five thousand years of cultural accumulation? There are many historical and cultural heritages in China. I believe these cultural stories with a long history are attractive enough to make Biombo friends interested in Chinese Motor stator dismantling machine products. If you have an interest in Chinese culture, let's take a look at it first. The Mausoleum of the First Qin Emperor, also known as the Qin Shi Huang Mausoleum, is a historic site located in Lintong District, Xi’an, China. It is the final resting place of Qin Shi Huang, who was the first emperor of China and the founder of the Qin Dynasty. The mausoleum complex covers an area of over 56 square kilometers and is surrounded by several smaller tombs, pits, and burial sites. The main tomb is located at the center of the complex and is comprised of a pyramid-like structure that rises over 50 meters high. The tomb was constructed during Qin Shi Huang's reign and took nearly 40 years to complete. The tomb is surrounded by a moat and an outer wall that is over 1.5 kilometers long, with four gates that guard the entrance to the tomb. The tomb is also guarded by an army of life-sized terracotta soldiers, horses, and chariots that are positioned facing eastward, ready to protect the emperor in the afterlife.

Contact us
Contact us and someone will be in touch with you shortly.

We respect your privacy. We Hate Spam As Much As You Do !

Headquarters

HENAN, CHINA
Gongyi City West Industrial Zone, Henan Province, China
Phone: +86 18539447368
Whatsapp: {whatsapp}