Motor stator dismantling machine

Brief introduction

The motor stator disassembly machine mainly consists of a hydraulic pump, hydraulic control system, thread cutting cylinder component, wire drawing cylinder component, and electric control system. It can be disassembled for 8-slot stator and 12 slot stator. The hydraulic copper cutting machine in the dismantling equipment of waste motors is an environmentally friendly equipment that cuts the copper wires in the motor stator. The entire equipment is driven by hydraulic pressure. When cutting, the waste motor stator is first supported on the support column (drum structure), and the copper cutting positioning plate is used to position the motor stator, The working ability of this equipment is equivalent to manual disassembly by ten workers, which controls the up and down movement of the cutting blade through one foot switch and the up and down limit position of the induction switch to cut the copper wire coil of the motor stator.

Process flow

First, support the waste motor stator on the support column, and use a copper cutting positioning plate to position the motor stator. Use one of the foot switches to control the cutting blade to cut off the copper wire coils of the motor stator; Then place the cut motor stator on the lifting table of the copper pulling machine, and control the motor stator to rise to the copper pulling positioning plate through a manual switch. The copper pulling positioning plate limits the motor stator, and then use another foot switch to control the pliers to bite the copper coil, pull the copper wire coil out of the stator, and complete the disassembly of the stator. Users can recover the copper wire coil and stator core according to the actual situation.

The copper dismantling machine for the motor uses a foot switch, and the motor stator with copper wire coils after cutting is placed on the lifting table to rotate the screw of the puller. Mark the gap between the end cover and the base for easy resetting during assembly. The company has a copper production line for dismantling and recycling of waste rotors. We have stock available and welcome you to come and inspect and negotiate machine testing. You can ship the goods by paying the deposit, and the remaining payment will be collected and paid in full. And extend to the periphery of the connecting bolt hole, with a thickened section equipped with a crescent groove for the hammer head to rotate. Supply scrap motor dismantling and copper pulling equipment, air conditioning dismantling copper machines, company direct sales, quality assurance.

Technical parameter

Walk with the prosperity of the motherland and fulfill the dream of the rejuvenation of China In the era of intelligent manufacturing, the craftsman spirit is not outdated, and its essence is to do things wholeheartedly. Henan Maoxin Machinery Equipment Co., Ltd, For many years, Maoxin Machinery has focused on the Lithium battery and circuit board recycling field and polished the "craftsman" level talents on Motor stator dismantling machine products! Not afraid of the long road ahead, but looking forward to the future Congratulations to all Harper friends Together, let's achieve greatness and set new industry standards.

---

Hello,Harper friends.No matter where you are, we have a solution for you.

Maoxin respect your privacy. Whether to cooperate is the result of your careful investigation, not the result of Maoxin's efforts to communicate!

Headquarters

HENAN, CHINA
Gongyi City West Industrial Zone, Henan Province, China
Phone: +86 18539447368
Whatsapp: {whatsapp}