HomeSupporting equipmentWater spray tower equipment

      Water spray tower equipment

      As a type of environmental waste gas treatment equipment, it exists and is divided into circulating water spray towers according to its working principle. According to the material of the tower, it is divided into fiberglass spray towers, PP spray towers, and stainless steel spray towers. Choose a reasonable spray material and spray process based on the different properties of the exhaust gas. The exhaust gas is introduced into the PP spray tower through the air duct. After passing through the packing layer, the exhaust gas and sodium hydroxide absorption liquid undergo gas-liquid two-phase full contact absorption and neutralization reaction. After purification, the acid mist exhaust gas is dehydrated and demisted by a defogging plate before being discharged into the atmosphere by a fan. The absorption liquid is pressurized by a water pump at the bottom of the tower and sprayed down at the top of the tower. Later, it flows back to the bottom of the tower for recycling. The purified acid mist exhaust gas meets the emission requirements of local emission standards.

      "It is no accident to meet you". Thank you very much for clicking on the "Maoxin " website in the vast information on the Internet. It would be a great honor for Maoxin to provide you with [Water spray tower equipment] technical services! Optimize processes, improve efficiency, and save customers every minute of time Next you will see the Water spray tower equipment technical information prepared by Maoxin Water spray tower equipment technology for you. I hope it will be helpful to your choice!
       

      Equipment Introduction

      As a type of environmental waste gas treatment equipment, it exists and is divided into circulating water spray towers according to its working principle. According to the material of the tower, it is divided into fiberglass spray towers, PP spray towers, and stainless steel spray towers. Choose a reasonable spray material and spray process based on the different properties of the exhaust gas. The exhaust gas is introduced into the PP spray tower through the air duct. After passing through the packing layer, the exhaust gas and sodium hydroxide absorption liquid undergo gas-liquid two-phase full contact absorption and neutralization reaction. After purification, the acid mist exhaust gas is dehydrated and demisted by a defogging plate before being discharged into the atmosphere by a fan. The absorption liquid is pressurized by a water pump at the bottom of the tower and sprayed down at the top of the tower. Later, it flows back to the bottom of the tower for recycling. The purified acid mist exhaust gas meets the emission requirements of local emission standards.

      When dusty or oily waste gas passes through the spray tower, a suitable position inside the tower (depending on the design) sprays out liquid media, some are alkaline solution, and some are sulfuric acid solution. If the exhaust gas contains acidity, choose alkaline spray to neutralize the acidity. If the exhaust gas contains alkalinity, choose sulfuric acid solution for absorption. The specific choice of acid-base solution depends on the nature of the waste gas and the situation of the enterprise itself. No acid or alkali, but oily or dusty waste gas can be treated by spraying a circulating water solution. When the exhaust gas enters from the bottom of the tower, it comes into contact with the spray medium sprayed out by the spray tower. After contact, the exhaust gas or oil pollution is wrapped in water droplets, and the water droplets that wrap the pollutants collide again, increasing the surface area and gravity. Under the influence of gravity, water droplets that wrap around pollutants fall into the bottom of the spray tower, with heavier pollutants settling at the bottom of the tower and lighter pollutants floating on the surface of the circulating water body.

      Design considerations

      1. When the exhaust gas contains oil and dust, it is necessary to consider whether to add filter fillers or nozzle models when designing the spray tower. Choosing an inappropriate nozzle can easily cause blockage in the spray tower water system.

      2. Choose the appropriate spray medium.

      3. Design reasonable airflow channels and water supply methods.

      4. Wastewater discharge and cleaning issues after spray tower spraying.

      5. Choose the appropriate water pump based on the appropriate gas-liquid ratio.

      6. The flow rate of an empty tower is generally designed to be 1-6 meters per second. But in the case of medium spraying and filling, the filtering wind speed can be reasonably selected based on the specific situation of the exhaust gas.


      Innovation leads the future, wisdom changes the world Thank you for your attention to the Water spray tower equipment product information, and welcome your valuable suggestions , If you have any questions about Maoxin Water spray tower equipment, please call Maoxin technical engineer at [+86 18539447368]. Promote the new style of energy conservation and emission reduction, and advocate green and low-carbon habits 



      Maoxin takes Marshall Islands friends to see China! As a populous country develops, China has a rich historical legacy to draw from.


      There are many historical and cultural heritages in China. I believe these cultural stories with a long history are attractive enough to make Marshall Islands friends interested in Chinese Water spray tower equipment products.


      This cultural heritage is alluring to Marshall Islands friends:

      The palace's architecture is characterized by its elaborate roofs, ornate carvings, and intricate decorations, showcasing the supreme craftsmanship and attention to detail of China's ancient artisans. One of the most impressive features of the palace is the Hall of Supreme Harmony, a massive wooden structure that was used for important ceremonies and imperial audiences. The hall boasts a high throne and incredible roof ornaments, supported by enormous columns and flanked by two smaller halls.
      The Forbidden City is also home to an impressive collection of cultural artifacts and treasures from China's imperial past. The Palace Museum contains over a million pieces of art and objects, including ancient paintings, calligraphy, ceramics, jade, bronze, and other precious items.
      Visitors to the Forbidden City can take guided tours, explore the galleries and museums, admire the stunning architecture, and immerse themselves in the rich history and culture of China's imperial past. They can also enjoy traditional performances and cultural activities, such as tea ceremonies and imperial costume shows.
      The Forbidden City is a must-see destination for anyone visiting Beijing. Its stunning architecture, rich cultural heritage, and historical significance make it one of the most impressive landmarks in China and a testament to the creativity and ingenuity of China's ancient artisans and emperors.

       


      Hello,Marshall Islands friends.Your satisfactions are all that we pursuit! Contact us if you are interested in our products. We are honored to provide you with any service!

      We respect your privacy. We Hate Spam As Much As You Do !
      Headquarters
      HENAN, CHINA
      Gongyi City West Industrial Zone, Henan Province, China
      Phone: +86 18539447368
      Whatsapp: {whatsapp}

      get in touch with us
      Contact

      Gongyi City West Industrial Zone, Henan Province, China

      Phone (WeChat): +86 18539447368

      Email: 18539447368@163.com