Water spray tower equipment

Equipment Introduction

As a type of environmental waste gas treatment equipment, it exists and is divided into circulating water spray towers according to its working principle. According to the material of the tower, it is divided into fiberglass spray towers, PP spray towers, and stainless steel spray towers. Choose a reasonable spray material and spray process based on the different properties of the exhaust gas. The exhaust gas is introduced into the PP spray tower through the air duct. After passing through the packing layer, the exhaust gas and sodium hydroxide absorption liquid undergo gas-liquid two-phase full contact absorption and neutralization reaction. After purification, the acid mist exhaust gas is dehydrated and demisted by a defogging plate before being discharged into the atmosphere by a fan. The absorption liquid is pressurized by a water pump at the bottom of the tower and sprayed down at the top of the tower. Later, it flows back to the bottom of the tower for recycling. The purified acid mist exhaust gas meets the emission requirements of local emission standards.

When dusty or oily waste gas passes through the spray tower, a suitable position inside the tower (depending on the design) sprays out liquid media, some are alkaline solution, and some are sulfuric acid solution. If the exhaust gas contains acidity, choose alkaline spray to neutralize the acidity. If the exhaust gas contains alkalinity, choose sulfuric acid solution for absorption. The specific choice of acid-base solution depends on the nature of the waste gas and the situation of the enterprise itself. No acid or alkali, but oily or dusty waste gas can be treated by spraying a circulating water solution. When the exhaust gas enters from the bottom of the tower, it comes into contact with the spray medium sprayed out by the spray tower. After contact, the exhaust gas or oil pollution is wrapped in water droplets, and the water droplets that wrap the pollutants collide again, increasing the surface area and gravity. Under the influence of gravity, water droplets that wrap around pollutants fall into the bottom of the spray tower, with heavier pollutants settling at the bottom of the tower and lighter pollutants floating on the surface of the circulating water body.

Design considerations

1. When the exhaust gas contains oil and dust, it is necessary to consider whether to add filter fillers or nozzle models when designing the spray tower. Choosing an inappropriate nozzle can easily cause blockage in the spray tower water system.

2. Choose the appropriate spray medium.

3. Design reasonable airflow channels and water supply methods.

4. Wastewater discharge and cleaning issues after spray tower spraying.

5. Choose the appropriate water pump based on the appropriate gas-liquid ratio.

6. The flow rate of an empty tower is generally designed to be 1-6 meters per second. But in the case of medium spraying and filling, the filtering wind speed can be reasonably selected based on the specific situation of the exhaust gas.

Professional focus, excellence How to make Maoxin [Water spray tower equipment] quality stable and reliable, create greater customer value, and provide quality assured products for the Kiribati market is the direction that Maoxin are committed to pursuing!Sincerely thank new and old Water spray tower equipment customers for their cooperation and support, we work together to create a better future.

---

Maoxin takes Kiribati friends to see China! How much charm is there? A civilization disguised as a country! There are many historical and cultural heritages in China. I believe these cultural stories with a long history are attractive enough to make Kiribati friends interested in Chinese Water spray tower equipment products. This cultural heritage will undoubtedly capture the attention of Kiribati friends: The Potala Palace, is a majestic and iconic landmark located in Lhasa, Tibet. Standing atop a hill overlooking the city, the palace is one of the most famous and awe-inspiring attractions not only in Tibet but in all of Asia. The palace was originally built in the 7th century by King Songtsen Gampo, who is said to have been inspired to build it after marrying Princess Wencheng of the Tang Dynasty. Over the centuries, the palace has been expanded and renovated numerous times by subsequent Dalai Lamas, resulting in the sprawling and magnificent complex that we see today. The Potala Palace is famous for its unique architecture, which combines elements of both Tibetan and Chinese styles. The palace consists of two main sections, the White Palace and the Red Palace, which are connected by a series of staircases and corridors. The White Palace was originally used for administrative purposes, while the Red Palace served as a spiritual center and contains numerous temples, shrines, and prayer halls.

Hello,Kiribati friends.No matter where you are, we have a solution for you.

Maoxin respect your privacy. Not promoting and not disturbing is Maoxin's work principle!

Headquarters

HENAN, CHINA
Gongyi City West Industrial Zone, Henan Province, China
Phone: +86 18539447368
Whatsapp: {whatsapp}