HomeSupporting equipmentWater spray tower equipment

      Water spray tower equipment

      As a type of environmental waste gas treatment equipment, it exists and is divided into circulating water spray towers according to its working principle. According to the material of the tower, it is divided into fiberglass spray towers, PP spray towers, and stainless steel spray towers. Choose a reasonable spray material and spray process based on the different properties of the exhaust gas. The exhaust gas is introduced into the PP spray tower through the air duct. After passing through the packing layer, the exhaust gas and sodium hydroxide absorption liquid undergo gas-liquid two-phase full contact absorption and neutralization reaction. After purification, the acid mist exhaust gas is dehydrated and demisted by a defogging plate before being discharged into the atmosphere by a fan. The absorption liquid is pressurized by a water pump at the bottom of the tower and sprayed down at the top of the tower. Later, it flows back to the bottom of the tower for recycling. The purified acid mist exhaust gas meets the emission requirements of local emission standards.

      Dear [Water spray tower equipment] customer, it is very lucky that you can find us in the vast information! Strengthen management, improve efficiency, promote high-quality development, and achieve vision goals .Since its establishment, Henan Maoxin Machinery Equipment Co., Ltd has been deeply involved in the Lithium battery and circuit board recycling field and has tried to provide technical improvement Water spray tower equipment products for Lithium battery and circuit board recycling customers! The following is the relevant information of Water spray tower equipment product organized by Maoxin Machinery for you. 
       

      Equipment Introduction

      As a type of environmental waste gas treatment equipment, it exists and is divided into circulating water spray towers according to its working principle. According to the material of the tower, it is divided into fiberglass spray towers, PP spray towers, and stainless steel spray towers. Choose a reasonable spray material and spray process based on the different properties of the exhaust gas. The exhaust gas is introduced into the PP spray tower through the air duct. After passing through the packing layer, the exhaust gas and sodium hydroxide absorption liquid undergo gas-liquid two-phase full contact absorption and neutralization reaction. After purification, the acid mist exhaust gas is dehydrated and demisted by a defogging plate before being discharged into the atmosphere by a fan. The absorption liquid is pressurized by a water pump at the bottom of the tower and sprayed down at the top of the tower. Later, it flows back to the bottom of the tower for recycling. The purified acid mist exhaust gas meets the emission requirements of local emission standards.

      When dusty or oily waste gas passes through the spray tower, a suitable position inside the tower (depending on the design) sprays out liquid media, some are alkaline solution, and some are sulfuric acid solution. If the exhaust gas contains acidity, choose alkaline spray to neutralize the acidity. If the exhaust gas contains alkalinity, choose sulfuric acid solution for absorption. The specific choice of acid-base solution depends on the nature of the waste gas and the situation of the enterprise itself. No acid or alkali, but oily or dusty waste gas can be treated by spraying a circulating water solution. When the exhaust gas enters from the bottom of the tower, it comes into contact with the spray medium sprayed out by the spray tower. After contact, the exhaust gas or oil pollution is wrapped in water droplets, and the water droplets that wrap the pollutants collide again, increasing the surface area and gravity. Under the influence of gravity, water droplets that wrap around pollutants fall into the bottom of the spray tower, with heavier pollutants settling at the bottom of the tower and lighter pollutants floating on the surface of the circulating water body.

      Design considerations

      1. When the exhaust gas contains oil and dust, it is necessary to consider whether to add filter fillers or nozzle models when designing the spray tower. Choosing an inappropriate nozzle can easily cause blockage in the spray tower water system.

      2. Choose the appropriate spray medium.

      3. Design reasonable airflow channels and water supply methods.

      4. Wastewater discharge and cleaning issues after spray tower spraying.

      5. Choose the appropriate water pump based on the appropriate gas-liquid ratio.

      6. The flow rate of an empty tower is generally designed to be 1-6 meters per second. But in the case of medium spraying and filling, the filtering wind speed can be reasonably selected based on the specific situation of the exhaust gas.


      Grow in challenges and surpass in innovation Maoxin , take building the brand as its important task, and make a small contribution to manufacturing  all over the world! Henan Maoxin Machinery Equipment Co., Ltd ,Since its establishment, Maoxin Machinery has been rooted in the field of [Lithium battery and circuit board recycling], and has created [Water spray tower equipment] series products of exceptional! Every call you make, every  cooperation, is the driving force for Maoxin to move forward! Bless customers We cherish the opportunity to cooperate with every new and old Water spray tower equipment customers, and believe that through joint efforts can create more brilliant results.



      Maoxin takes Daerah Belait friends to see China! China has a rich and complex history that spans over 5,000 years.


      There are many historical and cultural heritages in China.
      Maoxin Machinery believe these cultural stories with a long history are attractive enough to make Daerah Belait friends interested in Chinese Water spray tower equipment products.


      You will certainly find this cultural heritage intriguing:

      One of the most impressive features of the Yarlung Zangbo Grand Canyon is the Yarlung Zangbo River itself. The river flows through the canyon and is a vital source of water for the region. Its waters are emerald green and flow with impressive force, carving a path through the rugged terrain that is both beautiful and intimidating.Visitors can expect to see towering trees, breathtaking waterfalls, and crystal-clear streams that are teeming with life.
      The Yarlung Zangbo Grand Canyon is a true gem of nature that offers visitors a glimpse into the power and beauty of the natural world. With its steep cliffs, diverse ecosystem, and powerful river, it is a must-visit destination for anyone seeking adventure, tranquility, or simply a deep appreciation for the splendor of nature.


      Hello,Daerah Belait friends.Your satisfactions are all that we pursuit! Contact us if you are interested in our products. We are honored to provide you with any service!

      We respect your privacy. We Hate Spam As Much As You Do !
      Headquarters
      HENAN, CHINA
      Gongyi City West Industrial Zone, Henan Province, China
      Phone: +86 18539447368
      Whatsapp: {whatsapp}

      get in touch with us
      Contact

      Gongyi City West Industrial Zone, Henan Province, China

      Phone (WeChat): +86 18539447368

      Email: 18539447368@163.com