Water spray tower equipment

Equipment Introduction

As a type of environmental waste gas treatment equipment, it exists and is divided into circulating water spray towers according to its working principle. According to the material of the tower, it is divided into fiberglass spray towers, PP spray towers, and stainless steel spray towers. Choose a reasonable spray material and spray process based on the different properties of the exhaust gas. The exhaust gas is introduced into the PP spray tower through the air duct. After passing through the packing layer, the exhaust gas and sodium hydroxide absorption liquid undergo gas-liquid two-phase full contact absorption and neutralization reaction. After purification, the acid mist exhaust gas is dehydrated and demisted by a defogging plate before being discharged into the atmosphere by a fan. The absorption liquid is pressurized by a water pump at the bottom of the tower and sprayed down at the top of the tower. Later, it flows back to the bottom of the tower for recycling. The purified acid mist exhaust gas meets the emission requirements of local emission standards.

When dusty or oily waste gas passes through the spray tower, a suitable position inside the tower (depending on the design) sprays out liquid media, some are alkaline solution, and some are sulfuric acid solution. If the exhaust gas contains acidity, choose alkaline spray to neutralize the acidity. If the exhaust gas contains alkalinity, choose sulfuric acid solution for absorption. The specific choice of acid-base solution depends on the nature of the waste gas and the situation of the enterprise itself. No acid or alkali, but oily or dusty waste gas can be treated by spraying a circulating water solution. When the exhaust gas enters from the bottom of the tower, it comes into contact with the spray medium sprayed out by the spray tower. After contact, the exhaust gas or oil pollution is wrapped in water droplets, and the water droplets that wrap the pollutants collide again, increasing the surface area and gravity. Under the influence of gravity, water droplets that wrap around pollutants fall into the bottom of the spray tower, with heavier pollutants settling at the bottom of the tower and lighter pollutants floating on the surface of the circulating water body.

Design considerations

1. When the exhaust gas contains oil and dust, it is necessary to consider whether to add filter fillers or nozzle models when designing the spray tower. Choosing an inappropriate nozzle can easily cause blockage in the spray tower water system.

2. Choose the appropriate spray medium.

3. Design reasonable airflow channels and water supply methods.

4. Wastewater discharge and cleaning issues after spray tower spraying.

5. Choose the appropriate water pump based on the appropriate gas-liquid ratio.

6. The flow rate of an empty tower is generally designed to be 1-6 meters per second. But in the case of medium spraying and filling, the filtering wind speed can be reasonably selected based on the specific situation of the exhaust gas.

Thank you for browsing the Henan Maoxin Machinery Equipment Co., Ltd website [Water spray tower equipment] products! Maoxin Machinery is a Water spray tower equipment product Chinese supplier. Since its establishment, it has been deeply engaged in the Lithium battery and circuit board recycling field and has tried to provide good after-sales service Water spray tower equipment products for Lithium battery and circuit board recycling customers! Technology changes the future, innovation leads the trend 

---

Maoxin takes Port-au-Prince friends to see China! It is a journey that will leave you with a deeper understanding and appreciation of Chinese culture and its enduring legacy. There are many historical and cultural heritages in China. Maoxin Machinery believe these cultural stories with a long history are attractive enough to make Port-au-Prince friends interested in Chinese Water spray tower equipment products. This cultural heritage will undoubtedly capture the attention of Port-au-Prince friends: The Yarlung Zangbo Grand Canyon, located in the Tibet Autonomous Region of China, is a breathtaking natural wonder that truly reflects the awe-inspiring power of nature. As one of the deepest canyons in the world with a depth of over 5,000 meters, the Yarlung Zangbo Grand Canyon boasts a unique and beautiful landscape that attracts visitors from all over the globe. One of the most striking features of this canyon is its steep and rugged terrain. The canyon walls rise dramatically on both sides, creating an impressive spectacle that is both awe-inspiring and humbling. The color of the rocks and cliffs changes throughout the day as the sun moves across the sky, casting shadows and highlights that create a mesmerizing display of natural beauty. Another standout feature of the Yarlung Zangbo Grand Canyon is its diverse ecosystem. The canyon is home to a wide variety of rare and exotic plants and animals, including many species that are not found anywhere else in the world.

We achieve economies of scale: Our wide client portfolio allows us to minimize production costs.

his and our experience in the market allows us to offer the best commercial conditions for our clients.We have very attractive prices. Contact us for further information and you will be surprised of the significant savings that your company can achieve by working with us.

We respect your privacy. We Hate Spam As Much As You Do !

Headquarters

HENAN, CHINA
Gongyi City West Industrial Zone, Henan Province, China
Phone: +86 18539447368
Whatsapp: {whatsapp}