Shredder

Introduction

Wood crusher is an advanced fine crushing equipment, which is a series of products that absorb the advantages of various crushers and fully utilize theories such as impact, shear, mutual impact, and grinding to meticulously innovate. The shape, size, and discharge fineness of the feeding port of the wood crusher can be customized according to the actual needs of users.

Characteristic

1. The machine is structurally divided into a main machine (wood crusher main machine) and auxiliary machines (airflow separator, induced draft fan, powder collector, dust collector). A powder collector (also known as a centrifugal separator) is a device that allows powdered particles that meet the crushing requirements to enter the powder collector tangential to the airflow of the induced draft fan through the air duct, causing the airflow carrying the powder to rotate. The powder particles are then thrown towards the cylinder wall, settled at the discharge port, and enter the powder collection bag on their own.

2. The induced draft fan is a centrifugal fan that mainly provides suitable air pressure and volume for the unit, and plays a role in dust removal.

3. The main body of the dust collector is a box, and there is a ash door at the bottom of the box. The box should be installed in a vertical frame. The upper body of the vertical frame is covered with filter bags, and the dust collector receives dusty gas from the centrifugal separator. Enter the box from the entrance and discharge into the external space through the filter bag. Due to the fact that the dust removal efficiency of the bag filter can reach over 99%. When the filter resistance of the dust collector increases, you can choose to stop the machine and manually clean it during the rest time. When cleaning the dust collection bag, you can shake the filter bag by hand for tens of seconds to shake off the dust stuck on the surface of the filter bag. The shaken dust can be directly discharged into the dust collection bag through the ash door of the box, and then removed. Green and environmentally friendly, complete.

Applicable scope

1. Wood category: pine, miscellaneous wood, poplar, cedar, logs, bamboo, waste scraps, sawdust, sawdust, particleboard, nailed construction formwork, charcoal, activated carbon, etc.

2. Branches: branches, branches, roots, leaves, bark, etc.

3. Edible fungi: plant roots, stems, leaves, flowers, fruits, various edible fungi, etc.

4. Agriculture: straw, traditional Chinese medicine, tobacco stalks, grains, corn cobs, cellulose, potato residue, tea, hair, soybean meal, cotton, refined cotton, cowhide, sheepskin, etc.

5. Food category: dehydrated vegetables, hawthorn, ginger, garlic slices, pumpkin powder, seasoning, jujube, seasoning, feed, distiller's grains, furfural, cakes, etc.

6. Difficult characteristic materials: mica, graphite, bentonite, perlite, shrimp skin, fish meal, shells, seaweed, marine products, etc.

Customization of hundreds of difficult and characteristic materials, with a crushing degree that can achieve the desired effect of user customization!

Technical parameter

Operating instructions

1. Connect the power and check if the steering is correct.

2. When replacing the cutting tool, extend the cutting edge 2-4mm beyond the flat surface of the cutterhead, and then tighten the bolt. If the pressure bolt thread is found to be worn, it should be replaced immediately to prevent damage to the sliding disc nut.

3. To change the extension and retraction of the knife, it is necessary to extend the length of the knife uniformly.

4. By adjusting the length of the blade, if the particle size cannot reach the desired level, switch to a different aperture sieve.

5. It is strictly prohibited to throw firewood with stones and nails into the machine to prevent damage to knives and internal components.

6. Pay attention to checking the hammer bolts. If any looseness is found, tighten them immediately. If the hammer and bolts are severely worn, they should be replaced.

7. The grinding angle is a straight line of 28-30 °, and it is strictly prohibited to grind it into a convex surface.

People-oriented, looking to the future, and creating a better future for employees Maoxin , take building the brand as its important task, and make a small contribution to manufacturing  all over the world! Henan Maoxin Machinery Equipment Co., Ltd ，Since its establishment, Maoxin Machinery has been rooted in the field of [Lithium battery and circuit board recycling], and has created [Shredder] series products of high quality and low price! Every call you make, every  cooperation, is the driving force for Maoxin to move forward! Bless customers We are confident that our joint ventures will be met with great success and acclaim in the international market.

---

Maoxin takes Managua friends to see China! Up and down for five thousand years, a magical country.

There are many historical and cultural heritages in China. I believe these cultural stories with a long history are attractive enough to make Managua friends interested in Chinese Shredder products.


You will certainly find this cultural heritage intriguing:

The Great Wall of China, also known as the Long Wall or the 10,000 Li Wall, is an iconic symbol of China that is recognized all over the world. It is a massive fortification system that stretches more than 13,000 miles across northern China and is made up of multiple walls, watchtowers, fortresses, and other structures.
The Great Wall was built over several centuries, beginning in the 7th century BC and continuing through the Ming Dynasty, which ruled from the 14th to the 17th century. The wall was constructed using a variety of materials, including mud, bricks, tamped earth, and stone, depending on the region and the terrain.
One of the most remarkable features of the Great Wall is its incredible length and the fact that it spans a wide variety of landscapes, including deserts, mountains, and grasslands. The wall was built to serve as a barrier against invasions from the north and has played an important role in shaping Chinese history and culture.

---

Feel free to get in touch with us in the manner that’s most convenient for you.
 

Use the contact form below to send us a message. We usually respond within 24 hours.
 

Do you feel more comfortable on the phone? The telephone numbers of Maoxin Machinery, both landline and mobile, are listed on this page. There is no automatic "press 1 never contact anyone" message. You'll be talking to a real person.
 

We respect your privacy. We Hate Spam As Much As You Do !

Headquarters

HENAN, CHINA
Gongyi City West Industrial Zone, Henan Province, China
Phone: +86 18539447368
Whatsapp: {whatsapp}