Water spray tower equipment

Equipment Introduction

As a type of environmental waste gas treatment equipment, it exists and is divided into circulating water spray towers according to its working principle. According to the material of the tower, it is divided into fiberglass spray towers, PP spray towers, and stainless steel spray towers. Choose a reasonable spray material and spray process based on the different properties of the exhaust gas. The exhaust gas is introduced into the PP spray tower through the air duct. After passing through the packing layer, the exhaust gas and sodium hydroxide absorption liquid undergo gas-liquid two-phase full contact absorption and neutralization reaction. After purification, the acid mist exhaust gas is dehydrated and demisted by a defogging plate before being discharged into the atmosphere by a fan. The absorption liquid is pressurized by a water pump at the bottom of the tower and sprayed down at the top of the tower. Later, it flows back to the bottom of the tower for recycling. The purified acid mist exhaust gas meets the emission requirements of local emission standards.

When dusty or oily waste gas passes through the spray tower, a suitable position inside the tower (depending on the design) sprays out liquid media, some are alkaline solution, and some are sulfuric acid solution. If the exhaust gas contains acidity, choose alkaline spray to neutralize the acidity. If the exhaust gas contains alkalinity, choose sulfuric acid solution for absorption. The specific choice of acid-base solution depends on the nature of the waste gas and the situation of the enterprise itself. No acid or alkali, but oily or dusty waste gas can be treated by spraying a circulating water solution. When the exhaust gas enters from the bottom of the tower, it comes into contact with the spray medium sprayed out by the spray tower. After contact, the exhaust gas or oil pollution is wrapped in water droplets, and the water droplets that wrap the pollutants collide again, increasing the surface area and gravity. Under the influence of gravity, water droplets that wrap around pollutants fall into the bottom of the spray tower, with heavier pollutants settling at the bottom of the tower and lighter pollutants floating on the surface of the circulating water body.

Design considerations

1. When the exhaust gas contains oil and dust, it is necessary to consider whether to add filter fillers or nozzle models when designing the spray tower. Choosing an inappropriate nozzle can easily cause blockage in the spray tower water system.

2. Choose the appropriate spray medium.

3. Design reasonable airflow channels and water supply methods.

4. Wastewater discharge and cleaning issues after spray tower spraying.

5. Choose the appropriate water pump based on the appropriate gas-liquid ratio.

6. The flow rate of an empty tower is generally designed to be 1-6 meters per second. But in the case of medium spraying and filling, the filtering wind speed can be reasonably selected based on the specific situation of the exhaust gas.

Continuous innovation, the pursuit of quality！Speak less and act more! No amount of language and packaging can compare to working hard on products! Maoxin precipitates the brand value of Water spray tower equipment with every minute of action!

---

Maoxin takes Massana friends to see China! A cultural heritage with five thousand years of dynastic succession. There are many historical and cultural heritages in China. I believe these cultural stories with a long history are attractive enough to make Massana friends interested in Chinese Water spray tower equipment products. If you have an interest in Chinese culture, let's take a look at it first. The Mausoleum of the First Qin Emperor, also known as the Qin Shi Huang Mausoleum, is a historic site located in Lintong District, Xi’an, China. It is the final resting place of Qin Shi Huang, who was the first emperor of China and the founder of the Qin Dynasty. The mausoleum complex covers an area of over 56 square kilometers and is surrounded by several smaller tombs, pits, and burial sites. The main tomb is located at the center of the complex and is comprised of a pyramid-like structure that rises over 50 meters high. The tomb was constructed during Qin Shi Huang's reign and took nearly 40 years to complete. The tomb is surrounded by a moat and an outer wall that is over 1.5 kilometers long, with four gates that guard the entrance to the tomb. The tomb is also guarded by an army of life-sized terracotta soldiers, horses, and chariots that are positioned facing eastward, ready to protect the emperor in the afterlife.

Build long-term relationships and grow organically.

The right balance of people, process and technology allows us to consistently exceed customer expectations in terms of quality, precision, speed and cost. Let's talk about your next project and how we can meet your specific requirements.

Maoxin respect your privacy. Not promoting and not disturbing is Maoxin's work principle!

Headquarters

HENAN, CHINA
Gongyi City West Industrial Zone, Henan Province, China
Phone: +86 18539447368
Whatsapp: {whatsapp}