HomeSupporting equipmentWater spray tower equipment

      Water spray tower equipment

      As a type of environmental waste gas treatment equipment, it exists and is divided into circulating water spray towers according to its working principle. According to the material of the tower, it is divided into fiberglass spray towers, PP spray towers, and stainless steel spray towers. Choose a reasonable spray material and spray process based on the different properties of the exhaust gas. The exhaust gas is introduced into the PP spray tower through the air duct. After passing through the packing layer, the exhaust gas and sodium hydroxide absorption liquid undergo gas-liquid two-phase full contact absorption and neutralization reaction. After purification, the acid mist exhaust gas is dehydrated and demisted by a defogging plate before being discharged into the atmosphere by a fan. The absorption liquid is pressurized by a water pump at the bottom of the tower and sprayed down at the top of the tower. Later, it flows back to the bottom of the tower for recycling. The purified acid mist exhaust gas meets the emission requirements of local emission standards.

      Culture casts the brand, and quality wins the future Customers from Klepeda, hello! Today is 2025-10-13. Since the Maoxin website http://www.cnchangtong.com was built, you are the 45126th visitor to Maoxin enterprise! Maoxin Machinery has been committed to technological innovation and product building in the Lithium battery and circuit board recycling field since its establishment, and has accumulated to provide high standard [Water spray tower equipment] products for many customers!
       

      Equipment Introduction

      As a type of environmental waste gas treatment equipment, it exists and is divided into circulating water spray towers according to its working principle. According to the material of the tower, it is divided into fiberglass spray towers, PP spray towers, and stainless steel spray towers. Choose a reasonable spray material and spray process based on the different properties of the exhaust gas. The exhaust gas is introduced into the PP spray tower through the air duct. After passing through the packing layer, the exhaust gas and sodium hydroxide absorption liquid undergo gas-liquid two-phase full contact absorption and neutralization reaction. After purification, the acid mist exhaust gas is dehydrated and demisted by a defogging plate before being discharged into the atmosphere by a fan. The absorption liquid is pressurized by a water pump at the bottom of the tower and sprayed down at the top of the tower. Later, it flows back to the bottom of the tower for recycling. The purified acid mist exhaust gas meets the emission requirements of local emission standards.

      When dusty or oily waste gas passes through the spray tower, a suitable position inside the tower (depending on the design) sprays out liquid media, some are alkaline solution, and some are sulfuric acid solution. If the exhaust gas contains acidity, choose alkaline spray to neutralize the acidity. If the exhaust gas contains alkalinity, choose sulfuric acid solution for absorption. The specific choice of acid-base solution depends on the nature of the waste gas and the situation of the enterprise itself. No acid or alkali, but oily or dusty waste gas can be treated by spraying a circulating water solution. When the exhaust gas enters from the bottom of the tower, it comes into contact with the spray medium sprayed out by the spray tower. After contact, the exhaust gas or oil pollution is wrapped in water droplets, and the water droplets that wrap the pollutants collide again, increasing the surface area and gravity. Under the influence of gravity, water droplets that wrap around pollutants fall into the bottom of the spray tower, with heavier pollutants settling at the bottom of the tower and lighter pollutants floating on the surface of the circulating water body.

      Design considerations

      1. When the exhaust gas contains oil and dust, it is necessary to consider whether to add filter fillers or nozzle models when designing the spray tower. Choosing an inappropriate nozzle can easily cause blockage in the spray tower water system.

      2. Choose the appropriate spray medium.

      3. Design reasonable airflow channels and water supply methods.

      4. Wastewater discharge and cleaning issues after spray tower spraying.

      5. Choose the appropriate water pump based on the appropriate gas-liquid ratio.

      6. The flow rate of an empty tower is generally designed to be 1-6 meters per second. But in the case of medium spraying and filling, the filtering wind speed can be reasonably selected based on the specific situation of the exhaust gas.


      History casts technical heritage, and strength creates future brilliance How to make Maoxin [Water spray tower equipment] quality stable and reliable, create greater customer value, and provide firm quality products for the Klepeda market is the direction that Maoxin are committed to pursuing!In the journey of cooperation, we are willing to walk hand in hand with new and old Water spray tower equipment customers, enjoy the scenery along the way, and reach the other side of their dreams.



      Maoxin takes Klepeda friends to see China! What supports a populous country to become a manufacturing powerhouse? Five thousand years of cultural accumulation?


      There are many historical and cultural heritages in China.
      Maoxin Machinery believe these cultural stories with a long history are attractive enough to make Klepeda friends interested in Chinese Water spray tower equipment products.


      One of the world's famous cultural heritage sites:

      Shaolin Kung Fu is a traditional Chinese martial art that originated in the Shaolin Temple in Henan province, China. It is one of the oldest and most famous styles of Chinese martial arts, with a history dating back over 1,500 years. Shaolin Kung Fu is known for its powerful and dynamic movements, as well as its emphasis on physical and mental discipline, strength, and agility.

      Hello,Klepeda friends.No matter where you are, we have a solution for you.

      Maoxin respect your privacy. Not promoting and not disturbing is Maoxin's work principle!
      Headquarters
      HENAN, CHINA
      Gongyi City West Industrial Zone, Henan Province, China
      Phone: +86 18539447368
      Whatsapp: {whatsapp}

      get in touch with us
      Contact

      Gongyi City West Industrial Zone, Henan Province, China

      Phone (WeChat): +86 18539447368

      Email: 18539447368@163.com