HomeSupporting equipmentWater spray tower equipment

      Water spray tower equipment

      As a type of environmental waste gas treatment equipment, it exists and is divided into circulating water spray towers according to its working principle. According to the material of the tower, it is divided into fiberglass spray towers, PP spray towers, and stainless steel spray towers. Choose a reasonable spray material and spray process based on the different properties of the exhaust gas. The exhaust gas is introduced into the PP spray tower through the air duct. After passing through the packing layer, the exhaust gas and sodium hydroxide absorption liquid undergo gas-liquid two-phase full contact absorption and neutralization reaction. After purification, the acid mist exhaust gas is dehydrated and demisted by a defogging plate before being discharged into the atmosphere by a fan. The absorption liquid is pressurized by a water pump at the bottom of the tower and sprayed down at the top of the tower. Later, it flows back to the bottom of the tower for recycling. The purified acid mist exhaust gas meets the emission requirements of local emission standards.

      "It is no accident to meet you". Thank you very much for clicking on the "Maoxin " official website in the vast information on the Internet. It would be a great honor for Maoxin to provide you with [Water spray tower equipment] technical services! Determined to work hard for a new bureau Next you will see the Water spray tower equipment technical information prepared by Maoxin Water spray tower equipment technology for you. I hope it will be helpful to your choice!
       

      Equipment Introduction

      As a type of environmental waste gas treatment equipment, it exists and is divided into circulating water spray towers according to its working principle. According to the material of the tower, it is divided into fiberglass spray towers, PP spray towers, and stainless steel spray towers. Choose a reasonable spray material and spray process based on the different properties of the exhaust gas. The exhaust gas is introduced into the PP spray tower through the air duct. After passing through the packing layer, the exhaust gas and sodium hydroxide absorption liquid undergo gas-liquid two-phase full contact absorption and neutralization reaction. After purification, the acid mist exhaust gas is dehydrated and demisted by a defogging plate before being discharged into the atmosphere by a fan. The absorption liquid is pressurized by a water pump at the bottom of the tower and sprayed down at the top of the tower. Later, it flows back to the bottom of the tower for recycling. The purified acid mist exhaust gas meets the emission requirements of local emission standards.

      When dusty or oily waste gas passes through the spray tower, a suitable position inside the tower (depending on the design) sprays out liquid media, some are alkaline solution, and some are sulfuric acid solution. If the exhaust gas contains acidity, choose alkaline spray to neutralize the acidity. If the exhaust gas contains alkalinity, choose sulfuric acid solution for absorption. The specific choice of acid-base solution depends on the nature of the waste gas and the situation of the enterprise itself. No acid or alkali, but oily or dusty waste gas can be treated by spraying a circulating water solution. When the exhaust gas enters from the bottom of the tower, it comes into contact with the spray medium sprayed out by the spray tower. After contact, the exhaust gas or oil pollution is wrapped in water droplets, and the water droplets that wrap the pollutants collide again, increasing the surface area and gravity. Under the influence of gravity, water droplets that wrap around pollutants fall into the bottom of the spray tower, with heavier pollutants settling at the bottom of the tower and lighter pollutants floating on the surface of the circulating water body.

      Design considerations

      1. When the exhaust gas contains oil and dust, it is necessary to consider whether to add filter fillers or nozzle models when designing the spray tower. Choosing an inappropriate nozzle can easily cause blockage in the spray tower water system.

      2. Choose the appropriate spray medium.

      3. Design reasonable airflow channels and water supply methods.

      4. Wastewater discharge and cleaning issues after spray tower spraying.

      5. Choose the appropriate water pump based on the appropriate gas-liquid ratio.

      6. The flow rate of an empty tower is generally designed to be 1-6 meters per second. But in the case of medium spraying and filling, the filtering wind speed can be reasonably selected based on the specific situation of the exhaust gas.


      Be sure to work hard to build a dream togetherIn today's manufacturing industry, the spirit of craftsmanship remains important.Henan Maoxin Machinery Equipment Co., Ltd has been dedicated to Global vision, localized service for many years, sticking to the Lithium battery and circuit board recycling field, and polishing "craftsman" level talents on Water spray tower equipment! With innovation as the core, promote the development of the industry and shape the future


      Maoxin takes Perth friends to see China! China. It is known for its many dynasties, including the Xia, Shang, Zhou, Qin, Han, Tang, .ong, Yuan, Ming, and Qing dynasties.


      There are many historical and cultural heritages in China. I believe these cultural stories with a long history are attractive enough to make Perth friends interested in Chinese Water spray tower equipment products.


      One of the world's famous attractions:

      The Summer Palace is a vast imperial garden located in the northwest suburbs of Beijing, China. It covers an area of 290 hectares, including a large lake named Kunming Lake. It was originally built in 1750 during the Qing Dynasty and has been expanded and renovated several times by subsequent emperors. It was listed as a UNESCO World Heritage Site in 1998.

      After receiving service requests, Maoxin will respond through telephone or email support within the response time stipulated by service level to help customers analyze, diagnose and locate problems, provide solutions to problems, and guide customers to implement them. To enable customers to enjoy more convenient and comprehensive consultant-type expert services.

      Maoxin respect your privacy. We will not proactively communicate with you anything beyond your wishes!
      Headquarters
      HENAN, CHINA
      Gongyi City West Industrial Zone, Henan Province, China
      Phone: +86 18539447368
      Whatsapp: {whatsapp}

      get in touch with us
      Contact

      Gongyi City West Industrial Zone, Henan Province, China

      Phone (WeChat): +86 18539447368

      Email: 18539447368@163.com